Abubakar Tafawa Balewa University

LIST OF STAFF JOURNAL PUBLICATIONS

1. ANDREWS, G.E., ASERE, A.A. and MKPADI, M.C., "Transpiration and Full Coverage Discrete Hole Film Cooling", The Inst. of Chem. Engrs. 11th Annual Research Meeting on Heat Transfer & Catalytic Reactors, pp. 92_95, April 1984.

2. ANDREWS, G.E. and ASERE, A., "Transpiration Cooling of Gas Turbine Combustion Chamber", First U.K. National Heat Transfer Conference, Inst. Chem. Eng. Symp. Series No. 86, pp. 1047_1056, 1984.

3. ANDREWS, G.E., ASERE, A.A., GUPTA, M.L. and MKPADI, M.C., "Full Coverage Discrete Hole Wall Cooling: The Influence of Hole Size", Int. J. Turbo and Jet Eng. 2, pp. 213_225, 1985.

4. ANDREWS, G.E., HUSSAIN, C.I. and ASERE, A.A., "Full Coverage Impingement Heat Transfer: The Variation in Pitch to Diameter Ratio at a Constant Gap", AGARD_Heat Transfer and Cooling in Gas Turbine, pp. 26_1 to 26_13, May 1985.

5. ANDREWS, G.E., ASERE, A.A., HUSSAIN, C.I. & MKPADI, M.C., "Transpiration and Impingement/Effusion Cooling of Gas Turbine Combustion Chambers", AIAA/ISABE 85_7095, PP. 794_803, 1985.

6. ANDREWS, G.E., ASERE, A.A., MKPADI, M.C. & TIRMAHI, A., "Transpiration Cooling : Contribution of Film Cooling to the Overall Cooling Effectiveness", Int. J. Turbo & Jet Engines 3, pp. 245_256, 1986.

7. ANDREWS, G.E., ALIKHANIZADEN, M., ASERE, A.A., HUSSAIN, C.I., KHOSHKBAR, M.S. & MKPADI, M.C., "Small Diameter Film Cooling Holes: Wall Convective Heat Transfer", J. Turbomachinery, Vol. 108, pp. 283_289, Oct. 1986.

8. ASERE, A.A., "Parameters Dictating the Efficient Use of Coal With Reference to Nigerian Coal", Proc. Nigerian Soc. Engrs., pp. 128_131, 1987.

9. NDUBIZU, C.C., ASERE, A.A., & OKEREKE, C.D., "Environmental Pollution and Fire Hazard Management in a Developing Economy", Proc. Annual Sem. Nigerian Society of Engineers, Owerri, pp. 87_114, 1988.

10. ASERE, A.A., NWOSU, U.U. and OGWE, K.E., "The Engineering of a Grinding Machine with Available Local Materials", Proc. Nigerian Soc. Engineers, pp.111_118, 1988.

11. ASERE, A.A., "A Pollutant Reducing Equipment for Reserved Natural Energy Use", Proc. Nigerian Soc. Engrs. pp. 178_187, 1990.

12. ANDREWS, G.E., ASERE, A.A., GUPTA, M.L. and MKPADI, M.C., "Effusion Cooling: The Influence of the Number of Holes", J. Power and Energy, Instn. Mech. Engrs. Vol. 204, pp. 175_182, 1990.

13. ABDUL HUSAIN, R.A.A., ANDREWS, G.E., ASERE, A.A. and NDIEMA, C.K.W.,"Full Coverage Impingement Heat Transfer: Cooling Effectiveness", ASME, Paper 88_GT_270.

14. ANDREWS, G.E., ASERE, A.A., HUSSAIN, C.I., MKPADI, M.C. and NAZARI, A., "Impingement/Effusion Cooling: Overall Wall Heat Transfer", ASME Paper 88_GT_290.

15. ANDREWS, G.E., ASERE, A.A., GUPTA, M.L., MKPADI, M.C. and TIRMAHI, A., "Full Coverage Discrete Hole Film Cooling: The Influence of Number of Holes and Pressure Loss", ASME Paper 90_GT_61.

16. ASERE, A.A., "Some Characteristics of Large Coal Combustion in Fluidized Bed", J. Nigerian Soc. Engrs., Vol. 27, No. 1, pp. 58_67, 1992.

17. ASERE, A.A. and ALIYU, U.O., "Outlook of Nigeria's Energy Predicaments", Nigeria J. Rew. Energy, Vol.3, Nos 1 & 2, pp. 95_105, 1992.

18. ANDREWS, G.E., AL DABAGH, ASERE, A.A. BAZDIDI_TEHRANI, F., MKPADI, M.C. and NAZARI, A., "Impingement/Effusion Cooling", AGARD 80th PEP symposium, Heat Transfer and Cooling in Gas Turbines, pp. 30_1 - 30_10, 1992.

19. AJAYI, J.O., OLAGBEMIRO, T.O., ASERE, A.A., and DAVIS , M.S., "Elemental Depression of Plant Nutrients by Dust Pollution", J. Chem. Soc. Nigeria, Vol. 19, pp. 137 - 143, 1994.

20. ANDREWS, G.E., KHALIFA, M.I., ASERE, A.A. and BAZDIDI_TEHRANI, F., "Full Coverage Effusion Film Cooling with Inclined Holes", ASME 95_GT_274, 1995.

21. ASERE, A.A., "Air Pollution in Developing Economy - A Perspective", NSE Technical Transactions, Vol. 30, No 4, pp. 11 - 23, 1995.

22. ASERE, A.A., SAMBO, A.S. and ALI, S., "Purification of water in the Savannah Sub region with Solar Energy", Nig. J. Solar Energy, Vol. 13, pp. 40-44, 1995.

23. ASERE, A.A., EGWURUBE, J.A., SALAWU, O.B.E. and TOKAN, A., "Major Road Wash Away on Highway Construction: A Case Study from North Eastern Nigeria", Nigerian J. Tech. Educ., Vol. 15, No. 1, pp. 26-40, 1998.

24. ADISA, A.B., ASERE, A.A. and NGONOUE, T.F., "Simulation of a Job Flow", Nigerian Journal of Tropical Engineering, Vol. 1, No. 1, pp. 1-10, 1999.

25. ALI, S., SAMBO , S.A. and ASERE, A.A., "Household Energy Consumption around Bauchi Metropolis and Environs", Nigerian Journal of Tropical Engineering, Vol. 2, No. 1, pp. 37-48, 2001.

26. ALFA, B., JIYA, J.D., SAMBO, A.S. and ASERE, A.A., "Prediction of Hourly Solar Radiation Using Neural Network", Nigerian Journal of Renewable Energy, Vol. 9, No. 1&2, pp. 42-46, 2001.

27. ALFA, B., JIYA, J.D., SAMBO, A.S. and ASERE, A.A., "Global Energy Resources and Sustainable Development: Problems and Prospects", Proc. National Con. On Energy Resources and Dev. pp. 65-75, 2002.

28. SULAIMAN, S.A.T., ASERE, A.A. and SAMBO, A.S., "Solar Cooking Technology as an Alternative Means of Cooking in Nigeria : A Review", Proc. National Con. On Energy Resources and Dev. pp. 135-140, 2002.

29. EGBO, G., ASERE, A.A. and SAMBO, A.S., "Solar Concentrating Collectors: A Review", Proc. National Con. On Energy Resources and Dev. pp. 141-149, 2002.

30. ASERE, A.A., AJAYI, J.O., OLAGBEMIRO, T.O., DAVIES, M.S. and POOLEY, F.D., "Identification and pollution effects of Asbestos Fibre", J. Pure and Appl. Sci. Vol. 5(1) pp.136 - 142, 2002.

31. ASERE, A.A., HABOU, D. and SAMBO, A.S., "Performance of a Compound Parabolic Solar Cooker", N. Journal of Engineering Research and Development, Vol. 2, No. 1, pp. 30 - 37, 2003.

32. ASERE, A.A., BELLO, A.A. and SALAWU, O.A., "Temperature Boundary Layer Profiles of Wood Burning Stove", Nigerian Journal of Solar Energy, Vol. 14, pp. 135-139, 2003.

33. HABOU, D. ASERE, A.A., and ALHASSAN, A.M. "Comparative Study on the Drying Rate of Tomatoes and Pepper Using Forced and Natural Convection Solar Dryers", Nigerian Journal of Solar Energy, Vol. 14, pp. 36-40, 2003.

34. SULAIMAN, S.A.T. ASERE, A.A., and SAMBO, A.S. "Comparative Study of Various Types of Solar Cookers in the North-Eastern Part of Nigeria ", Nigerian Journal of Solar Energy, Vol. 14, pp. 29-35, 2003.

35. SALAWU, O.A. and ASERE, A.A., "Computer Simulation and Performance for Solar Furnace/Oven for Bauchi Weather Condition", Nigerian J. of Tropical Engineering, Vol. 4, No. 1&2, pp. 1 - 16, 2003.

36. HABOU, D. ASERE, A.A., and SAMBO, A.S., "Simulation on the Performance of a 2X-CPC Solar Cooker", Nigerian J. of Tropical Engineering, Vol. 4, No. 1&2, pp. 41 - 48, 2003.

37. NDUBUBA, O.I., ASERE, A.A. and NDUBUBA, E.E., "Quality Evaluation of Portable Water in Parts of Bauchi North-East", Nigerian J. of Tropical Engineering, Vol. 4, No. 1&2, pp. 54 -62, 2003.

38. EGBO, G., ASERE, A.A., SAMBO, A.S. and OLOPADE, A.E., "Heat-Treatment Effect on Torsion Strength of Welded-Joint of Medium Carbon Steel (0.25 - 0.35)", Nigerian J. of Tropical Engineering, Vol. 4, No. 1&2, pp. 79 - 83, 2003.

39. BAWA, M.A. and ASERE, A.A., "Solar Powered Cathodic Protection - Means of Saving National Income", J. Corrosion Science & Tech., Vol. 1.1, pp. 7-10, 2004.

40. EGBO, G., SAMBO, A.S. and ASERE, A.A., "Solar Steam Generation Using Parabolic Collectors: A Review", N. J. Renewable Energy, Vol. 11, No. 1&2, pp. 136-144, 2004.

41. EGBO, G., SAMBO, A.S. and ASERE, A.A., "Direct Solar Steam Generation Concept Using Parabolic Concentrating Collectors: A Review", N. J. Renewable Energy, Vol. 11, No. 1&2, pp. 145-151, 2004.

42. ADISA, A.B., SAMBO, A.S., and ASERE, A.A., "Simulation of a Wood Burning Stove", NSE Transactions, Vol. 39, No. 3, pp. 26-35, 2004.

43. HABOU, D., SAMBO, A.S., and ASERE, A.A., "The effect of turbidity of spherical particles on the thermal performance of a solar water heater", Botswana Journal of Technology, Vol. 14, No. 2, pp. 38-44, 2005.

44. EGBO, G., SAMBO, A.S. and ASERE, A.A., "Development of Energy Equations for Parabolic Trough Solar Collector", N. Journal of Engineering Research and Development, Vol. 4, No. 1, pp. 28-36, 2005.

45. EGBO, G., SAMBO, A.S. and ASERE, A.A., "Performance Evaluation of a Parabolic - Trough Solar Collector", N. Journal of Engineering Research and Development, Vol. 4, No. 1, pp. 45-51, 2005.

46. G. AFETI, G. EGBO, S. DISPLAY and F. RESCH, (November 18 - 20 1992), "Size Distribution Study of Harmattan Dust particles in the North of Nigerian", Conference Paper presented at 8 th International Conference on Aerosols, Gams-Coffra, France.

47. GERRY. EGBO, M. A. BAWA and A. S. MUHAMMAD, (2004), "Case-hardening Low Carbon Steel using Non-Activated Charcoal", Nigerian Journal of Engineering Research and Development, Vol. 3, No. 2, pp 13-15.

48. GERRY. EGBO, M. A. BAWA and P. C. UBOGU, (2004); "Effects of Heat Treatment on Torsional Strength of Mild Steel Weld Joints", Nigerian Journal of Engineering Research and Development, Vol. 3, No. 2. 43-46.

49. G. EGBO, A. A. BELLO, A.A. ASERE and Z. ISMAILA, (2004), "Calculation method for determination of machining allowance", Nigerian Journal of Tropical Engineering, Vol. 5, Nos. 1&2, pp 38-42.

50. ABDULKABIR RAJI, O.K. ABUBAKAR and AJE TOKAN; "Effect of Oxy-Acetylene welding on the Mechanical Properties of Aluminum Alloy, Steel and Brass", National Engineering Conference Series Vol.5 No.1: pp132-137, 1998.

51. D.A. MAMMAN, A. TOKAN and J.S. JATAU; "Corrosion Management in water Distribution Systems, Industrial Chemistry Research Communications", Vol.1 (2) pp 9-18 (2000).

52. JATAU, J. S, DATAU, S. G and TOKAN, A; "The effect of Tension on the Dimension of wire Rolled Products", Journal of Engineering Application-Research Communications, Vol.1 (4) pp34-44, (2000).

53. J.S. JATAU and A. TOKAN; "Determination of Neutral Angle and forward Slip when rolling and drawing in a round pass", Nigerian Journal of Tropical Engineering, Vol.2 No.1, 2001.

54. A. TOKAN, E. A. A. ADELEMONI and S. G. DATAU; "Mould characteristics of Azare foundry sand", Journal of Raw Materials Research and Development Council, Vol. 1 No 1, 2004.

55. JACOB JATAU : "Optimum Rigidity of Rolling Mill Stand - A Review, Modeling, Simulation and Control", B. AMSE Press, Vol. 38. No. 1. 1991, pp 11 - 21.

56. V.M. KASHAYEV, JACOB JATAU and V.N. KUPIN: "Workout, research and mounting of way and device for stabilizing dimensions of Rolled products at mill 350.2 of the Makiyevka Metallurgical Plant", Proceedings of paper presented at the scientific conference of finished scientific research works of the Donetsk Polytechnic Institute, Part I (Donetsk, D.P.I) 1991.pp.169

57. V.M. KASHAYEV, JACOB JATAU, et al. "Determination of the Lengthwise Stability of metal between stands of continuous section mills", Izvestia Vuzou , Ferrous Metallurgy Series. 4.1992, pp.27-28.

58. V.M KASHAYEV, JACOB JATAU, et al; "Research of the New Process combining Rolling and Drawing in a round Pass", Izvestia Vuzov , Ferrous Metallurgy Series. 10.1992, pp.14-17.

59. ONOGU, M.I., JATAU J. S and SAMBO A.S; "Towards Enabling Environment for Technological Development", Bulletin of Science Association of Nigeria  Vol. 22 (1999) pp 19-22.

60. J.S. JATAU , A. TOKAN, and M. YA ' U; "Improving the Surface Hardness of Locally Produced Low Carbon Steel using Charcoal and Barium Carbonate as the Carbonaceous Compound", Bulletin of Science Association of Nigeria Vol. 22 (1999) pp 99-106.

61. J. S. JATAU , S. G. DATAU and D. AGYO; "Application of Simplex Method to Determine the Minimum Deviation in Parameters Affecting Dimensional Accuracy during Rolling from their set values", Bulletin of Science Association of Nigeria Vol.22 (1999) pp 113-120.

62. ONOGU, M. I., JATAU, J.S and SAMBO, A.S; "Industrial and Academic Linkages for Capacity Building ", Journal of Engineering Technology and Industrial Applications. Vol. 1 No. 1 pp. 121-123 (2000).

63. S.SULE, M.G. YISA, J.S. JATAU and D.Y. ALI; "Effects of speed and Moisture content on Draught of a Three Bottom Disc Plough on a sandy loam soil of Bauchi", Journal of Engineering Technology and Industrial Applications. Vol. 1, No. 4, pp 200 - 206 (2001).

64. O.B. OLOCHE, J.S. JATAU and G. LADAN; "Analysis of some physical and chemical characteristics of blended Agbaja and Itakpe Iron Ores", Nigerian Journal of Engineering Vol. 9, No. 1, 2001.pp 54-57.

65. S. SULE, J. S. JATAU and M.G. YISA; "A Comparative Study of Some Tractor Hitch Systems and Failure Modes", African Journal of Science and Technology. Vol. 2 No. 1, 2001. pp103- 107a.

66. J. S. JATAU and D. K. Garba; "Upgrading the Properties of Locally Produced Nigerian Steel to meet the Requirement for Rifle Barrel Production", Nigerian Journal of Engineering Vol. 10 No. 1, 2002. pp 123 - 127.

67. J.S. JATAU and S.G. DATAU; "The influence of Thermo-mechanical Treatment on some Mechanical Properties of Lead Alloys", Nigerian Journal of Engineering Vol. 10 No. 1, 2002. pp 1 - 6.

68. A. TOKAN, J.S. JATAU and E. I. MBAYA; "Improving the As-cast Hardness of Locally Produced High Chromium Cast Iron Balls", Nigerian Journal of Engineering Vol. 10 No. 1, 2002. pp137 - 145.

69. S. SULE, J.S. JATAU and Y. MOHAMMED; "Analysis of Chemical Elements in the Steyr Tractor Stabilizer Bracket", International Journal of Environmental Issues. Vol. 1 No. 2, 2003. pp39 - 44.

70. S. SULE, M.G. YISA, J. S. JATAU and S. I. IGE; "Strength Analysis of the Steyr Tractor Hitch Bracket", Nigerian Journal of Engineering Research and Development. Vol. 3 No. 1, 2004 pp59 - 63.

71. ADISA, A. B. & NGONOUE F. T. (1997) ; " Optimization of Production Schedules in a job Shop", Proceedings of Fourth National Engineering Conference Series, Kaduna . Vol.4 No.1 pp127-136

72. ADISA, A. B. (1998) ; " Recycling Carbon black pigmented polyethylene bags", Proceedings of Fifth National Engineering Conference Series, Kaduna . Vol.5 No.2 pp224-226

73. ADISA, A. B ., ASERE, A. A. & NGONOUE F. T. (1999); "Simulation of a job Flow", Journal of Tropical Engineering. Vol.1 No.1 pp1-10

74. ADISA, A. B. (1999); " Dynamics of Human Locomotion", Journal of Science Association of Nigeria . Vol. 22 No.2 pp177-180

75. A B ADISA and M L AUDU (2000); "Automatic Renumbering of Finite Element Nodes", Journal of Engineering Technology and Industrial Applications. Vol.1 No.1 pp40-43

76. A. A. ASERE, A. A. BELLO and O. A. SALAWU (2003); " Temperature Boundary Layer Profiles of Wood Burning Stove", Nigerian Journal of Solar Energy. Vol. 14 pp135 - 139

77.  BALA E J and MUHAMMAD M H (1995); "Hourly and Daily Average Ambient Temperature and Total Solar Radiation for Bauchi" Nigerian Journal of Solar Energy, Vol.13, pp 76-86

78. BALA, E. J. and MUHAMMAD, M. H, (1995): "Influence of Clearances Between Pumping Elements of a Positive Displacement Vane Pump on its Hydraulic Performance" Nigerian Journal Of Engineering, Vol. 7, No. 1; pp. 29-41

79. MUHAMMAD M H (1995); "Determination of Optimum Collector Orientation for Bauchi", Nigerian Journal of Solar Energy, Vol.13, pp 87-97

80. MUHAMMAD, M. H.; AUDU, M. L. and ASPINWALL, D. K (1999); "Empirical force-wear model development for tool wear monitoring in milling operations part 1" Journal of Engineering Applications 1 (3): 11-22

81.MUHAMMAD, M. H.; AUDU, M. L. and ASPINWALL, D. K (1999); "Recent trends in the Technology sub-sector: In-process tool condition monitoring in the metal cutting industry" Journal of Engineering Technology and Industrial Applications, Kaduna , Vol. 1. no. 2, pp. 145-150

82.MUHAMMAD, M. H.; AUDU, M. L. and ASPINWALL, D. K., AND AKU, S. Y. (2001); "Empirical force-wear model development for tool wear monitoring in milling operations part 2", Annals of Engineering Analysis 1 (1): 15-30

83.TOKAN, A., MUHAMMAD, M. H. and BUDAYE, S. (2001); "Local sourcing of Raw materials: Iron Ore in Azare", Journal of Engineering Technology and Industrial Applications, Kaduna , Vol. 1. no. 2, pp. 66-71

84.MUHAMMAD, M. H., AHMED, H. I. and ABDULWAHAB, T. (2001): "Construction and Testing of a Machine to Produce Plough components for Animal Traction Technology". Proceedings of the International Conference & Annual General Meeting, NIAE, Vol. 23, 2001. pp. 79-82.

85.MUHAMMAD, M. H., BAWA, M. A., and AKUCHI, N. T. (2003); "Characterisation of Alkaleri and Gombe Sand Samples", 20 th Proceedings of the Nigerian Metallurgical Society (NMS), pp. 31-34.

86. MUHAMMAD, M. H. and ABOJE, E. J. (2004); "Costing of a Poultry feed mill product for micro-cottage industry entrepreneur", Proceedings of the 5 th International Conference & 26 th Annual General Meeting, NIAE, Vol. 26, 2004. pp. 303-307.